Training 1.0 Help

Topologies

Topologies are slightly confusingly placed at the end of the UI. To configure a Pool with a LB Method of TWRR you must first configure a topology for it. The simple way to overcome this little hurdle is to first define your Pool with the WRR LB Method, configure your topologies then go back and update the Pool to use TWRR.

If by this point you cannot find the Topologies section without this document, stop and consider whether you should proceed. If you cannot find it alone yet still want to proceed, use this screenshot to help you locate the appropriate area for the configuration.

gslb_understanding_topologies_001.png

Then click on this

gslb_understanding_topologies_002.png

Then fill this out...with your own details, funny guy.

gslb_understanding_topologies_003.png

Then repeat

[gslb_understanding_topologies_004.png

Repeat again if you have another DC or IP range.

gslb_understanding_topologies_005.png

Once you have configured all your topologies you may restart GSLB.

gslb_understanding_topologies_006.png

Now, if you are going back to update your Pool from WRR to TWRR, you can do it thusly. Go back to Pools.

gslb_understanding_topologies_007.png

Edit your WRR pool

gslb_understanding_topologies_008.png

Update the 'LB Method' to 'twrr'

gslb_understanding_topologies_009.png

Restart GSLB

gslb_understanding_topologies_010.png

Then voila! Robert is your Mother's (of Father's) brother.

Last modified: 30 April 2024